Quad Auger

H1950 Quad Auger Mixer

Specifications

Capacity: 950ft3 | 26.9m3
Ration Capacity: 28000lbs | 12700kg
Box Weight: 22000lbs | 10000kg
Box Height: 88in | 224cm
Box Length: 233in | 592cm
Box Width: 102in | 259cm
Overall Height On Typical Truck: 133in | 338cm
Overall Length On Typical Truck: 320in | 813cm
Overall Width On Typical Truck: 102in | 259cm
Recommended Truck Engine: 360 HP
Variable Auger Speed: 4-26 RPM
Auger Drive System: Hydrostatic
Number Of Optional Knives: 36
Top Auger Thickness: 1/2in | 12.7mm
Lower Auger Thickness: 5/8in | 16mm
Discharge Height On Typical Truck: 52in | 132cm
Door Opening Width: 48in | 122cm
Floor Thickness: 1/4in | 6mm
Drum Wall Thickness: 1/4in | 6mm
Rear Axle Requirement: 44000lbs | 20000kg
Front Axle Requirement: 14000lbs | 6400kg

Warranty

Industry Leading

Ideal for large-scale operations, the H1950 Quad Auger TMR Mixer was designed with cattlemen in mind. Unprecedented large-flake integrity is a key benefit of this technology. A patented horizontal mixer with optional ribbon augers reduces pressure while providing consistent mix quality of a wide variety of rations. Operations are rewarded with higher effective fibre yields due to less feed compression within the mixing process

Our OrbitEvo Intelligent Controller and 5 button joystick allow for precise, one-handed control of the mixer. With everything at your fingertips, enjoy a short learning curve with the added bonus of saving up to one gallon of fuel per hour. Along with the 10-20% capacity increase (by weight) from our New Ribbon Augers, your operation can quickly realize ROI.