H1950 Auger Mixer

Specifications

Capacity: 950ft³ | 26.9m³
Ration Capacity: 28000lbs | 12700kg
Box Weight: 22000lbs | 10000kg
Box Height: 88in | 224cm
Box Length: 233in | 592cm
Box Width: 102in | 259cm
Overall Height On Typical Truck: 133in | 338cm
Overall Length On Typical Truck: 320in | 813cm
Overall Width On Typical Truck: 102in | 259cm
Recommended Truck Engine: 360 HP
Variable Auger Speed: 4-26 RPM
Auger Drive System: Hydrostatic
Number Of Optional Knives: 36
Top Auger Thickness: 1/2in | 12.7mm
Lower Auger Thickness: 5/8in | 16mm
Discharge Height On Typical Truck: 52in | 132cm
Door Opening Width: 48in | 122cm
Floor Thickness: 1/4in | 6mm
Drum Wall Thickness: 1/4in | 6mm
Rear Axle Requirement: 44000lbs | 20000kg
Front Axle Requirement: 14000lbs | 6400kg

Warranty

Industry Leading

The Jaylor MMI mixer does a phenomenal job of handling wet distillers grains along with both high roughage rations and high energy corn rations.

Scott Schiff

Schiff Farms Inc.

Ideal for large scale operations, the H1950 Quad Auger TMR Mixer was designed with cattlemen in mind. This patented Horizontal Mixer with optional Ribbon Augers allow unprecedented large flake integrity resulting from reduced pressure from the auger while providing consistent mix quality of a wide variety of rations and higher effective fiber yields due to less feed compression within the mixing process. Our OrbitEvo Intelligent Controller and 5 button joystick allows for precise, 1 handed control of the mixer. With everything at your fingertips there is a short learning curve, with the added bonus of saving up to 1 gal of fuel per hour. This, along with the 10-20% capacity increase (by weight) from our New Ribbon Augers, your operation can quickly realize ROI.